TITEBOND PRO-GRADE PLUS CAULK

Titebond Pro-Grade Plus Caulk is a multi-purpose, siliconized acrylic latex caulk for interior and exterior use. This easy-to-use formula dries quickly, will not cause shiners and cleans up with water. It offers great weather-resistance, has a water resistant seal once cured, tools easily and can be painted in 2 hours. It contains no plasticizers or phthalates and offers unbeatable adhesion to most common building materials including wood, metal, glass, tile and more.

*Color samples are digitally produced to best match product color. Actual product color may vary from the color shown. Product color may vary when wet but will achieve proper color when dry after 24 hours.

Features & Benefits

  • IDEAL FOR: Sealing joints, repairing cracks and back-filling gaps for interior and exterior applications.
  • SEALS: Wood, metal, glass, tile, drywall, plaster, concrete, plastic, fiberglass, masonry, aluminum, brick and most common building materials.
  • Joint movement capability ± 25%
  • Repair, seal & fill
  • Easy, water cleanup
  • Dries quickly
  • Paintable in 2 hours
  • Tools easily
  • Provides water resistant seal

Specifications

Exceeds:
  • ASTM C834 TYPE OP GRADE -18°C
  • ASTM C920 TYPE S GRADE NS CLASS 25

Application Guidelines

  • Application Temperature: Above 40°F (4°C)
  • Service Temperature Range: 0°F to 160°F (-18°C to 71°C)
  • Method of Application: Cartridge/caulking gun
  • Working Time: Approximately 10-15 minutes for 1/4" bead
  • Application Directions: Cartridge: 1. Surfaces must be clean and free of any material that may prevent adequate adhesion. Properly designed joint not to exceed 1/2" in depth. 2. Cut tip at 45° angle for 1/8" to 1/2" bead and place in cartridge gun. 3. Apply caulk into clean joint. If necessary, smooth bead immediately. It is the sole responsibility of the user to thoroughly test any proposed use with all substrates to determine project suitability.
    Pail: 1. Surfaces must be clean and free of any material that may prevent adequate adhesion. Properly designed joint not to exceed 1/2” in depth. 2. Apply caulk into clean joint with bulk caulk gun or trowel, following loading instructions from bulk gun manufacturer and ensuring not to entrap air in the caulk. If necessary, smooth bead immediately. 3. To ensure neat caulk lines, mask areas adjacent to joints. Once caulk is dry to the touch and does not transfer, remove masking tape. See titebond.com/sig for proper joint design. It is the sole responsibility of the user to thoroughly test any proposed use with all substrates to determine project suitability.
  • Painting: The caulk should be dry to the touch and ready to paint in 2-4 hours with a water-based (latex) paint that does not contain plasticizer.
  • Cleanup: Clean uncured material with water. After curing, excess caulk must be cut or scraped away.
  • Coverage:
    Container 1/8” Bead 1/4" Bead 3/8" Bead 1/2" Bead
    10.1 oz. Cartridge 123 ft. 31 ft. 14 ft. 8 ft.
    5 Gallon Pail 7843 ft. 1960 ft. 871 ft. 490 ft.

Physical Properties

  • Type: Siliconized acrylic
  • Calculated VOC: 10.1 oz. Cartridge: <1.5%
    5 Gallon Pail: <250 g/L
  • Solids: 80%
  • Flashpoint: Solvent free/Not applicable
  • Viscosity: 140,000 cps
  • Freeze / Thaw Stability: Stable
  • Storage Life: 24 months in a dry location at or below 75°F.

Limitations

Not designed for continuous submersion or use below the waterline. Air, caulk and surface temperature should be above 40°F. Do not apply if rain is expected within 12 hours. Cure time is dependent upon ambient conditions including temperature and humidity. The caulk should be dry to the touch and ready to paint in 2-4 hours with a water-based (latex) paint that does not contain plasticizer. For other paint types, a compatibility test is recommended. It is highly recommended to use backing material. For best results, store in a dry location at or below 75°F.

Product SKUs

Part NumberUPCCase UPCSizeWeightUnits Per PackagePackages Per PalletColor
84010370830840161003708308401310.1 Oz. Cartridge - White13.8012108
84070370830840785 Gallon Pail - White67.31124
84110370830841151003708308411210.1 Oz. Cartridge - Almond13.8312108
84210370830842141003708308421110.1 Oz. Cartridge - Brown13.8212108
84310370830843131003708308431010.1 Oz. Cartridge - Clear9.8312108
84410370830844121003708308441910.1 Oz. Cartridge – Slate Gray13.8112108
84510370830845111003708308451810.1 Oz. Cartridge – Cedar Tan13.8112108
84610370830846101003708308461710.1 Oz. Cartridge - Black13.7612108
84710370830847191003708308471610.1 Oz. Cartridge – Antique White13.8212108
84810370830848181003708308481510.1 Oz. Cartridge – Dark Bronze13.8112108

Warranty Statement

50 Year Limited Warranty: If not satisfied with product performance when used as directed, return container and proof of purchase to Franklin International, Inc. for replacement of product. Liability is limited to product replacement only.
Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.
2020 Bruck Street, Columbus, Ohio 43207
CUSTOMER SERVICE 1-800-669-4583
TECH SERVICE 1-800-347-4583
www.titebond.com

Franklin International